Kelly Controller KLS96601

Sinusoidal Controller for DC Brushless Hub Motor.
Suitable for 8000W, 10000W and 12000W motor.

Kelly Controller KLS96601 is supposed to reduce the noise of BLDC motor, especially for hub motor. Customers can program the KLS controller on PC software or Android App.

General Specification of Kelly Controller KLS96601:
1) Motor Current Limit, 30 seconds: 600A, depending on the model.
2) Motor Current Limit, continuous: 240A, depending on the model.
3) Battery Voltage: DC 24V-96V (max. DC 120V).
4) Frequency of Operation: 20kHz.
5) Standby Battery Current: less than 0.5mA.
6) 5V or 12V Sensor Supply Current: 40mA.
7) Controller supply voltage range: PWR, 24V to 96V for pin7 which can be connected from main battery pack B+,through a key switch.
8) Supply Current, PWR, 30mA Typical.
9)Configurable battery voltage range, B+. Max operating range: 18V to 1.25*Nominal Voltage.
10) Standard Throttle Input: 0-5 Volts(3-wire resistive pot), 1-4 Volts(hall active throttle).
11) Throttle Input: 0-5 Volts. Can use 3-wire pot to produce 0-5V signal.
12) Main Contactor Coil Driver: less than 2A.
13) Full Power Operating Temperature Range: 0 degree to 70 degrees(MOSFET temperature).
14) Operating Temperature Range: -40 degreesto 100 degrees (MOSFET temperature).
15) Max Battery Current: Configurable.